Compact, High-Efficiency Battery Solutions for Cordless Hand Mixers
Power modern kitchen appliances with stable, lightweight lithium battery systems. HIMAX helps brands enhance portability, runtime, and user safety in cordless mixing applications.
Your Challenges. Our Commitment.
Runtime Anxiety?
Our intelligent BMS extends battery life by 30% in the same form factor.
Safety & Recall Risks?
Exceed industry standards with our S-Tier Safety Testing Protocol for total compliance.
Design & Size Constraints?
Fit powerful, custom batteries into award-winning designs with our miniaturization expertise.
Himax Advantage More Than a Battery, We’re Your Partner
1. Discovery & Strategy
Our Vigilant Design for Safety ensures battery life extended by up
to 30% in the same form factor.
2. Rapid Prototyping
Exceed industry standards with our 9-Tier Safety Testing Protocol
for total compliance.
3. Global Mass Scale Production
Fulfill your customer demands with our engineering and manufacturing
expertise.
1.Engineered for Dynamic Kitchen Load Profiles
Unlike static electronics, cordless hand mixers operate under rapid load fluctuations—from light whisking to dense dough mixing. Battery systems must respond instantly without voltage drop.
Key design focus:
- High burst discharge → supports peak torque during thick batter mixing
- Stable voltage curve → ensures consistent motor speed & texture control
- Compact energy density → fits ergonomic handheld designs
- Low heat generation → improves user safety during prolonged use
→ Request mixer load-profile matched battery design
2.Food-Grade Safety & Compliance Architecture
Kitchen appliances require stricter safety perception from consumers. HIMAX integrates multi-layer protection systems aligned with global compliance expectations.
- Supports CE, UN38.3, IEC 62133, RoHS
- Food-contact environment–friendly material selection
- Multi-protection BMS (OVP/OCP/SCP/OTP)
- Certified cells with stable chemistry
→ Ask for compliance documentation package
3.Stable Performance for Repetitive Short-Cycle Use
Hand mixers typically operate in short bursts (1–10 min cycles) but require frequent reuse. Battery design must prioritize cycle durability over extreme capacity.
- Fast recharge compatibility
- High cycle life (>500–800 cycles typical Li-ion range*)
- Consistent output across partial discharge
- Low self-discharge for standby readiness
→ Get cycle-life test data for your product
4.Flexible OEM/ODM Battery Customization
Designed for compact appliance integration and brand differentiation.
- Voltage: 3.7V / 7.4V / 11.1V
- Capacity: 1500mAh – 4000mAh
- Form factors: cylindrical / Li-polymer flat packs
- Integrated or detachable battery modules
- Smart BMS tuning for motor compatibility
→ Share your housing design for tailored solution
5.Scalable Production & Quality Consistency
Built under strict QC systems to meet consumer electronics standards.
- Automated cell matching (ΔV / IR control)
- Aging & load simulation testing
- Batch traceability records
- Stable yield for retail-scale supply
→ Explore our automated production capability
6.Global Logistics for Consumer Battery Products
Optimized for international appliance distribution.
- UN38.3 compliant packaging
- Air/sea shipping solutions
- Export documentation support
- Retail packaging compatibility
→ Consult shipping plan for your market
7.Frequently Asked Questions
Q1: What battery type is most suitable?
Li-ion / Li-Po → compact, high energy density, ideal for handheld appliances
Q2: What runtime can be expected?
10–30 minutes/use → varies by speed level and mixing load
Q3: Is it safe for kitchen environments?
Yes → multi-layer BMS + certified cells ensure safe operation
Q4: Can the battery be replaceable?
Optional → depends on product design strategy (integrated vs modular)
Q5: Does it support fast charging?
Yes → optimized BMS enables controlled fast charging
Application Context & Design Constraints
• Consumer Kitchen Appliance Brand (EU Market)
• Application → cordless handheld mixer for home baking
The client aimed to replace corded mixers with a portable, rechargeable design targeting modern kitchens. Market feedback indicated increasing demand for mobility and minimal countertop clutter, especially among small household users.
Key challenges observed:
• Limited internal space in ergonomic handle
• High torque demand when mixing dense dough
• Heat accumulation during continuous use
• User concern over safety in kitchen environments
HIMAX Battery Solution & Configuration
→ Custom Compact Li-ion Pack (2S configuration)
Battery specification (applied model):
• Type: Li-ion (18650 cells)*
• Nominal Voltage: 7.4V
• Capacity: 2600–3000mAh
• Energy: ~19–22Wh
• Configuration: 2S1P
• Weight: ~180–220g
Key engineering optimizations:
• High-drain cell selection → supports torque spikes
• Thermal padding design → reduces handle heat buildup
• Compact structural layout → fits slim grip housing
• Smart BMS tuning → prevents overload during thick mixtures
Resolved pain points:
• Eliminated voltage drop during peak mixing
• Reduced overheating complaints
• Enabled stable multi-speed operation
Compliance, Value & Real-World Results
The battery system was developed using a validated platform with full documentation:
• UN38.3 certified
• CE & RoHS compliant
• Cycle life: ~500 cycles
Measured outcomes after integration:
• Runtime per charge: 20–35 minutes (multi-speed use)
• Improved product portability and user satisfaction
• Reduced return rate linked to overheating issues
• Clear battery standardization for mass production
From a product strategy perspective, the shift to lithium battery systems enabled the client to reposition their mixer line toward premium cordless kitchen appliances, aligning with broader consumer trends observed in brands like cordless stick mixers and portable kitchen tools (industry trend widely documented, specific brand battery data partially undisclosed).
Shawn
Battery Engineer
– Power System Design
With over 10 years of experience in lithium battery system design, he specializes in Li-ion, LiFePO4, and LiPo battery packs. His expertise includes BMS integration, thermal management, and custom power solutions for medical and consumer devices.
Dawn
Battery Engineer
– Safety & Compliance
A senior battery engineer focused on safety, testing, and certification. She has extensive experience with UN38.3, IEC 62133, IEC 62619, and CE compliance, supporting battery solutions for medical, industrial, and portable electronic applications.
Joan
Battery Engineer
– Custom Pack Development
Specializing in custom battery pack development, he works closely with OEM clients to optimize voltage, capacity, and form factor. His work supports scalable mass production with strict quality control and long-term reliability.
Alden
Battery Engineer
– Manufacturing & Quality Control
With hands-on experience in battery pack manufacturing, he oversees production processes, aging tests, and quality inspections. His work ensures consistent performance, low defect rates, and stable supply for OEM customers.
Caleb
Battery Engineer
– BMS & Protection Systems
Focused on battery management systems and protection design, she develops PCM/BMS solutions with overcharge, over-discharge, thermal, and short-circuit protection to enhance safety and operational stability across applications.
Nath
Battery Engineer
– Cell Selection & Performance
An experienced battery engineer specializing in cell evaluation and performance optimization. He focuses on energy density, discharge stability, and cycle life, ensuring reliable battery packs for medical and consumer electronic applications.
Safety & compliance for batteries
Transportation Safety (Global)
UN 38.3 — Lithium battery transport safety
MSDS / SDS — Material Safety Data Sheet
Battery Safety Standards
IEC 62133 — International lithium battery safety
standard
UL 2054 / UL 1642 — North American battery safety
standards
Market-Specific Regulations
European Union — CE, RoHS, EPR, GPSR
https://ec.europa.eu
South Korea — KC Certification
https://www.kats.go.kr
Japan — PSE (DENAN Law)
https://www.meti.go.jp
Global CB Scheme — IECEE CB
https://www.iecee.org
Certification scope depends on target markets and device classification and should be considered during battery design.
View the full list of battery certifications and compliance standards on our Certification page.
Ready to Power Your Product with Excellence?
We respond within 1 business day.
FAQs
Featured LiPo Batteries
Latest Blogs
https://www.himaxelectronics.com/wp-content/uploads/2026/06/1.-lifepo4-40ah-100c-high-temperature-discharge-test.jpg
400
800
admin
/wp-content/uploads/2019/05/Himax-home-page-design-logo-z.png
admin2026-06-02 03:19:242026-06-02 03:26:0740Ah LiFePO4 Battery for High-Temperature Emergency Lighting: IEC-Certified 100℃ Discharge with RS485 Monitoring
https://www.himaxelectronics.com/wp-content/uploads/2026/05/51-2v-50ah-lifepo4-golf-cart-battery-pack.jpg
400
800
admin
/wp-content/uploads/2019/05/Himax-home-page-design-logo-z.png
admin2026-05-29 01:26:122026-05-29 01:55:04Golf Cart Battery Upgrade: Is LiFePO4 Worth It in 2026?
https://www.himaxelectronics.com/wp-content/uploads/2026/05/36v-50ah-lithium-battery-pack-robot.jpg
400
800
admin
/wp-content/uploads/2019/05/Himax-home-page-design-logo-z.png
admin2026-05-26 08:38:182026-05-26 08:42:2936V 50Ah Robot Battery Pack: What Engineers Need to Know Before They Spec One
