Our intelligent BMS extends battery life by 30% in the same form factor.
Exceed industry standards with our S-Tier Safety Testing Protocol for total compliance.
Fit powerful, custom batteries into award-winning designs with our miniaturization expertise.
When it comes to law enforcement and security, equipment failure is simply not an option. At Himax Electronics, we specialize in custom battery solutions for body-worn cameras and advanced law enforcement gear. Unlike off-the-shelf products, our engineered power systems are designed for prolonged field operations, extreme environments, and seamless device integration. As a dedicated B2B partner, we deliver tailored engineering, smart BMS design, and scalable manufacturing to ensure uninterrupted performance in mission-critical situations.
Law enforcement professionals rely on body-worn cameras, tactical radios, and biometric scanners for safety and accountability. Therefore, their power systems must ensure continuous, stable, and reliable operation under all conditions.
Our custom lithium-ion and lithium-polymer batteries are designed to overcome challenges such as limited space, weight constraints, and continuous recording demands.
Body-worn cameras must remain lightweight and discreet. Therefore, we use high-density lithium cells to maximize energy capacity without increasing size or weight.
In addition, our battery systems operate reliably in harsh environments ranging from -20°C to 60°C, ensuring uninterrupted performance in all climates.
Shift-based operations require fast turnaround charging. Our batteries support rapid charging protocols and maintain 80%+ capacity after 500–1000 cycles.
At Himax Electronics, we engineer intelligent power systems rather than simple battery packs. The Battery Management System (BMS) acts as the core intelligence of every security device.
Unlike standard battery suppliers, we provide project-based engineering support from R&D to mass production. In addition, we design battery geometry to match your device housing and optimize performance for your hardware system.
Our custom battery packs are engineered for a wide range of law enforcement and security applications.
Safety and compliance are critical in law enforcement applications. Therefore, every battery undergoes strict laboratory testing before delivery.
We are more than a supplier — we are a strategic R&D battery partner. Moreover, we provide NDA protection, dedicated project management, and full lifecycle technical support.
Q: How long does custom development take?
Typically 1–2 weeks for design, and 3–4 weeks for prototype delivery after approval.
Q: Can battery fuel gauging be integrated?
Yes. We support smart BMS chips (I2C / SMBus) for accurate real-time battery status display.
Q: What is your MOQ for law enforcement projects?
We offer flexible MOQ for prototyping and pilot runs before scaling to mass production.
Do not let power failure compromise your next generation of body-worn cameras. Partner with Himax Electronics for mission-critical battery solutions designed for law enforcement systems.
A leading North American security equipment manufacturer faced a critical issue with their new 4K body-worn camera. Standard batteries couldn't support a full 12-hour shift of continuous high-definition recording and live GPS tracking. Furthermore, the existing battery bulk compromised the camera's compact design. Police officers complained about sudden power drops in freezing weather, risking the loss of crucial evidence. Consequently, the manufacturer needed a bespoke power solution offering higher capacity in a smaller footprint, alongside extreme temperature resilience, to secure a major government contract.
To address these bottlenecks, Himax Electronics engineered a custom lithium-polymer battery solution tailored precisely to the client's unique device geometry. Specifically, we utilized ultra-high-density cells, increasing overall capacity by 35% without expanding the physical footprint. Additionally, our R&D team integrated a smart Battery Management System (BMS) with I2C communication for accurate, real-time battery life display. To combat freezing conditions, we formulated a specialized low-temperature electrolyte, ensuring stable power delivery and continuous recording even at -20°C.
The implementation of our custom battery pack profoundly transformed the client's product performance. Because of the extended battery life, law enforcement officers could reliably record entire 12-hour shifts without swapping batteries. Moreover, the accurate fuel gauge eliminated unexpected power failures during critical operations. Ultimately, this enhanced reliability allowed our client to successfully secure the competitive government tender. By partnering with Himax Electronics, they transitioned from standard battery limitations to delivering a top-tier, field-proven security system.
Shawn
Battery Engineer
– Power System Design
With over 10 years of experience in lithium battery system design, he specializes in Li-ion, LiFePO4, and LiPo battery packs. His expertise includes BMS integration, thermal management, and custom power solutions for medical and consumer devices.
Dawn
Battery Engineer
– Safety & Compliance
A senior battery engineer focused on safety, testing, and certification. She has extensive experience with UN38.3, IEC 62133, IEC 62619, and CE compliance, supporting battery solutions for medical, industrial, and portable electronic applications.
Joan
Battery Engineer
– Custom Pack Development
Specializing in custom battery pack development, he works closely with OEM clients to optimize voltage, capacity, and form factor. His work supports scalable mass production with strict quality control and long-term reliability.
Alden
Battery Engineer
– Manufacturing & Quality Control
With hands-on experience in battery pack manufacturing, he oversees production processes, aging tests, and quality inspections. His work ensures consistent performance, low defect rates, and stable supply for OEM customers.
Caleb
Battery Engineer
– BMS & Protection Systems
Focused on battery management systems and protection design, she develops PCM/BMS solutions with overcharge, over-discharge, thermal, and short-circuit protection to enhance safety and operational stability across applications.
Nath
Battery Engineer
– Cell Selection & Performance
An experienced battery engineer specializing in cell evaluation and performance optimization. He focuses on energy density, discharge stability, and cycle life, ensuring reliable battery packs for medical and consumer electronic applications.
Certification scope depends on target markets and device classification and should be considered during battery design.
View the full list of battery certifications and compliance standards on our Certification page.
We respond within 1 business day.
https://www.himaxelectronics.com/wp-content/uploads/2026/05/36v-50ah-lithium-battery-pack-robot.jpg
400
800
admin
/wp-content/uploads/2019/05/Himax-home-page-design-logo-z.png
admin2026-05-26 08:38:182026-05-26 08:42:2936V 50Ah Robot Battery Pack: What Engineers Need to Know Before They Spec One
https://www.himaxelectronics.com/wp-content/uploads/2026/05/lipo-battery-3-7v-470mah-403438-portable-medical-device.jpg
400
800
admin
/wp-content/uploads/2019/05/Himax-home-page-design-logo-z.png
admin2026-05-22 02:45:102026-05-22 03:18:093.7V 470mAh LiPo Battery for Portable Medical Monitoring Devices
https://www.himaxelectronics.com/wp-content/uploads/2026/05/nimh-aaa-battery-pack-vibration-analyzer-ndт-testing.jpg
400
800
admin
/wp-content/uploads/2019/05/Himax-home-page-design-logo-z.png
admin2026-05-19 03:21:062026-05-19 03:55:30NiMH AAA 4.8V 800mAh Battery Pack for Mechanical Equipment Testing
